Filter
Top Products
2000-Sheet Drawer User’s Guide
6
Installing the 2000-Sheet Drawer
Decide on an installation location for the 2000-sheet drawer. The
printer, and possibly other options, will be placed on top of the
drawer, so allow a maximum of 137.16 cm (4 ½ ft) for clearance.
Note:
Your drawer is pre-configured to either letter or A4 paper
size. To use a different paper size, see page 12
before
placing any options or the printer on the 2000-sheet drawer.
1
Turn the printer power off and unplug the power cord.
2
Disconnect any other cables attached to the printer.
3
Place any options you may have on top of the drawer one at
a time. Refer to your printer documentation for proper
installation instructions.
4
Ask someone to help you lift the printer and position it
above the drawer and any options you may have installed in
step 3.
CAUTION:
Make sure your fingers are not under the
printer when you set it down. Use the
handholds on the printer or ask someone to
help you lift it.