Filter
Top Products
SIC Command
1-3
Draft document
Id Values
The supported values of Id are as follows. If the Id is any other value, the parm bytes
are ignored.
Note: The most common ID values are C5 and C6. Remaining values are listed for
backward compatibility. Not all Parms are valid for each Id value. Some are
ignored.
4 04 Initialized to the factory default
setting.
Then updated to updated to
reflect parm values in SIC
command
unchanged Initialized to the
factory default
settings.
Not initialized. Not cleared.
5 05 Initialized to the factory default
setting.
Then updated to updated to
reflect parm values in SIC
command
unchanged Initialized to the
factory default
settings.
Not initialized. Cleared.
254 FE Initialized to the user default
setting.
Then updated to updated to
reflect parm values in SIC
command
NVRAM
updated to
reflect parm
values in SIC
command
Initialized to the
user default
settings.
Not initialized. Cleared.
255 FF Initialized to the factory default
setting.
NVRAM
updated to
reflect parm
values in SIC
command
Initialized to the
factory default
setting.
Initialized to the
factory default
setting.
Cleared.
Table 1-2: Id Values
Printer Dec Hex Notes
2580 /2581
2590/2591
3 03 Supported in Native mode.
Supported in Proprinter III mode (258X only).
Parm 1 and parm 2 are valid.
If parms 3 - 24 are specified, they are ignored. See the following parm
tables.
2580 /2581
2590/2591
22 16
2590/2591 35 23
2590/2591 36 24
Table 1-1: Initial Values (Continued)
Dec Hex Current Settings
User Default
Settings
Default Macro
Settings
Other Macro
Settings
Download
Font