Filter
Top Products
Daft 2000/12/04
Faxing
20
2
B
Close the Document Feeder
(ADF).
Note
❒ When sending a bound original,
the received image may contain
some black areas. To reduce this
effect, hold down the original to
prevent its bound part from ris-
ing.
-
--
-
Bound Original Page Order
When sending bound originals
(books, magazines, etc.), you can
choose to have either the left page or
right page sent first.
⇒
Chapter 4,
"Book Fax" in the Advanced Features
manual.
Note
❒ The default setting is Send Right
Page first.
⇒
Chapter 8, "Parame-
ter Setting" in the Advanced Fea-
tures manual.
Setting Originals in the
Document Feeder (ADF)
Use the Document Feeder (ADF) to
scan in a stack of originals in one op-
eration. The Document Feeder (ADF)
can handle both single-sided and
double-sided originals.
Limitation
❒ The maximum document length is
1200mm (47").
❒ Place all the originals to be sent in
a single stack.
❒ You cannot set originals in the
Document Feeder (ADF) one page
at a time or in sheaves.
❒ Do not open the Document Feeder
(ADF) while it is scanning the orig-
inals or a document could become
jammed.
Note
❒ If you send documents longer than
420mm (17"), select Long Docu-
ment mode with the User Parame-
ters. If a jam occurs, the document
might be damaged because scan-
ning will not stop.
⇒
P.21
“Setting
a Scan Area”
⇒
Chapter 8, " Param-
eter Setting" in the Advanced Fea-
tures manual.
❒ And also you must use memory
transmission because the docu-
ments longer than 420mm (17")
could not be sent by immediate
transmission.
❒ If an original jams, press the
{
Clear/
Stop
}
key then remove the original
carefully.
❒ If your original is bent or folded,
flatten it before you set it.
❒ Set thin originals on the exposure
glass.
Reference
For information about the sizes
and number of originals that can
be placed in the Document Feeder
(ADF),
⇒
Chapter 9, "Acceptable
types of Originals" in the Ad-
vanced Features manual.
A
Adjust the document guide to
match the size of your originals.
Align the edges of your originals
and stack them in the Document
Feeder (ADF) face up.