LG Electronics 1045 Fax Machine User Manual


 
Daft 2000/12/04
Faxing
26
2
Memory Transmission
In Memory Transmission mode, after
you press the
{
Start
}
key, the machine
does not dial the destination until all
pages of your fax message have been
scanned into memory (in contrast
with Immediate Transmission, where
the number is dialed first and pages
are scanned and sent one by one).
Memory Transmission is useful be-
cause:
You can take your original away
from the machine without having
to wait too long
While your message is being sent,
other people can operate the ma-
chine
You can send the same message to
more than one place in a single op-
eration (Broadcasting)
Important
If there is a power failure (Main
Power switch is off) or the plug is
pulled out for more than 1 hour, all
the files programed in memory are
deleted. As soon as power is re-
stored, the Power Failure Report is
printed to help you identify delet-
ed files. If you turn just the opera-
tion switch off, files are not
deleted.
Chapter 10, "When
Power is Turned off or Fails" in the
Advanced Features manual.
Limitation
If memory is full (0% appears on
the display), Memory Transmis-
sion is disabled. Use Immediate
Transmission instead.
Note
Maximum number of Memory
Transmission files: 400 (up to 800
files with optional Expansion
Memory installed)
Maximum number of destinations
per Memory Transmission: 200
Combined total number of desti-
nations that can be programed:
500. (up to 2,000 destinations can
be available with Fax Function Up-
grade Unit.)
The theoretical maximum number
of destinations you can enter with
the number keys is 100, but this
will depend on the amount of
memory currently available.
The number of pages that you can
store in memory depends on the
original images and the scan set-
tings. You can store up to 160
standard pages (ITU-T #1 chart,
Resolution: Standard, Original
Mode: Text).
The machine will return to the de-
fault transmission mode (Memory
Transmission) after every trans-
mission. You can change this so
that the desired setting is main-
tained.
Chapter 7, "General Set-
ting/Adjustment" in the
Advanced Features manual.
The maximum total number of
documents that can be programed
in memory is as follows:
About 1000 pages with only the
optional Expansion Memory in-
stalled
About 2,080 pages with both the
optional Expansion Memory
and the optional Fax Function
Upgrade Unit installed