Filter
Top Products
11
ENG
ENGLISH
ASSEMBLING AND PREPARING
Mounting on a wall
For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.
10 cm
10 cm
10 cm
10 cm
10 cm
If you intend to mount the Monitor to a wall, attach
Wall mounting interface (optional parts) to the back
of the set.
When you install the Monitor using the wall
mounting interface (optional parts), attach it
carefully so it will not fall.
1
Please, Use the screw and wall mount interface
in accordance with VESA Standards.
2
If you use screw longer than standard, the
monitor might be damaged internally.
3
If you use improper screw, the product might
be damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
4
VESA compatible.
5
Please use VESA standard as below.
y
785mm(31 inch) or greater
* Fastening screw: Diameter 6.0 mm x Pitch 1.0
mm x Length 10 mm
y
Disconnect the power before installing or
moving the monitor. Otherwise electric shock
may occur.
y
If you install the Monitor on a ceiling or
slanted wall, it may fall and result in severe
injury. Use an authorized LG wall mount
and contact the local dealer or qualified
personnel.
y
Do not over tighten the screws as this may
cause damage to the Monitor and void your
warranty.
y
Use screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are
not covered by the warranty.
y
Use screws that are listed on the VESA
standard screw specifications.
y
The wall mount kit includes an installation
manual and necessary parts.
y
The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
y
The length of screws may differ depending
on the wall mount. Be sure to use the proper
length.
y
For more information, refer to the instructions
supplied with the wall mount.
CAUTION
NOTE