Filter
Top Products
46
ENG
ENGLISH
CUSTOMIZING SETTINGS
Setting Description
Tile Mode Tile Mode To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RGB Cable by distributor and
RS-232C.
Tile mode and choose Tile alignment and set the ID of the current product to
set location.
* Only after pressing the SET button the adjustments made to the settings will
be saved.
- Tile mode : column x row ( c = 1, 2, 3, 4, 5 r = 1, 2, 3, 4, 5)
- 5 x 5 available.
- Configuration of an integration screen is also available as well as
configuration of One by one Display.
Auto Config. Adjusts the screen position automatically.
The displayed image may be unstable for a few seconds while the
configuration is in progress.
PC Position Moving the screen position horizontally and vertically.
PC Size Adjust the horizontal and vertical size of the screen taking into account the size
of the bezel.
Natural The image is omitted by the distance between the screens to be naturally
shown.
Reset Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
NOTE
y
If Tile Mode is enabled, Smart Energy Saving and the Auto option in Energy Saving will be
disabled to provide the same picture quality as other displays.
PIP/PBP Videos or photos stored on the USB device can be displayed on a single monitor by dividing them
into the main and subscreens.
Option
Mode Sets the type of secondary screen.
*OFF: Disables the secondary screen.
*PIP (Picture In Picture): Displays the secondary screen in the main screen.
*PBP (Picture By Picture): Displays the secondary screen next to the main
screen.
Position Adjusts the position of the subscreen (top left, bottom left, top right, bottom
right) The default value is inthe bottom right.
Size Adjusts the size of the subscreen (Size 0-10). The default size of the PIP (Size:
0) is 480x240; the maximum size (Size: 10) is 960x540.
NOTE
y
The Position and Size options are enabled only in PIP mode.