Filter
Top Products
6
ENG
ENGLISH
ASSEMBLING AND PREPARING
Stand Body
Stand Base
Setting up the Monitor
Assembling the Stand Body and Base
1
Place the Monitor with the screen side down on
a flat and cushioned surface.
3
Secure the Stand Body the monitor using 2
screws.
Coin
2
Attach the Stand Body from the Monitor.
Insert the two Lockers of the Stand Body right
into the groove of the Monitor head and secure
them by pressing the left and right bottom
sides.
Locker
4
Check the direction of the Stand Base and
assemble it with the Stand Body. Using a
coin, turn the screw clockwise to secure the
Stand Base.
y
If you do not fasten the screws, the monitor
may fall, which may result in damage to the
product.
y
This illustration depicts the general type of
connection. Your monitor may differ from the
items shown in the picture.
y
Do not carry the product upside down
holding only the stand base. The product
may fall and get damaged or injure your foot.
y
Applying excessive force when fastening
screws may cause damage to the monitor.
Damage caused in this way will not be
covered by the product warranty.
CAUTION
WARNING