Filter
Top Products
Function
27
1. Press the MENU button and then use ,
button to select the menu.
2. Press the
, button to select
Presentation timer item and press OK
button.
3. Press the
, button to select Time alarm or Time keeper item.
4. Press the
, button to select the desired preset time.
5. The timer for Time keeper item starts to operate if you select specific time and press the OK button, and
the timer for Time alarm item starts to operate if you select specific time.
●
Time alarm function : If you select a specific time, it is displayed in minute units. After 1 minute, the remaining
time is displayed at the bottom right of the screen, and then disappears after 5 seconds.
When the remaining time is displayed, other OSD windows are closed. When the set
time is reached, ‘0 minute’ flickers 10 times at 1 second intervals, and then disappears.
●
Time keeper function : If you select a specific time, it continues to be displayed in minute(‘) and second(“)
units. Even though other OSD windows appear, the remaining time is displayed again
after the windows are closed. When the set time is reached. 0’ 00” flickers 10 times at
1 second intervals, and then disappears.
●
The Time alarm function and the Time keeper function cannot be used at the same time.
●
The Time alarm function can be set from 5 to 60 minutes at 5 minute intervals (Off, 5, 10, 15, 20, ..............,
55, 60 minutes).
●
The Time keeper function can be set from 1 to 10 minutes at 1 minute intervals, and from 10 to 60 minutes
al 5 minute intervals (Off, 1, 2, 3, 4, .............., 8, 9, 10, 15, 20, 25, .............., 55, 60 minutes).
●
You can use this function through the button on the control panel.
●
Press the MENU button twice or the RETURN button to exit the menu screen.
Presentation timer Function
1. Press the KEYSTONE +, - button of remote control.
2. Press the KEYSTONE +, - button to adjust the screen condition as you want.
●
Keystone can be adjusted from -20 to 20.
●
You can use the Keystone function on the menu screen by pressing the
MENU button, or by pressing the , buttons on the control panel.
●
You can use this function through the button on the control panel.
●
Press the MENU button twice or the RETURN button to exit the menu screen.
Using Keystone Function
*Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape.
*Only use the Keystone function when you can’t get the best angle of projection.
Keystone 0
Language
Aspect Ratio
Overscan
Flip horizontal
Flip vertical
Sleep time
Auto sleep
Presentation timer
English
4 : 3
To set
Off
Off
Off
MENU Prev. Move OK
Time alarm
Time Keeper
FG
Off
FG
Off
MENU Exit Move Select