Filter
Top Products
100
- Set IP and port when accessing a camera in the internal network(LAN) of the router.
WAN IP:10.177.192.69
※
IP in the figure below is an example to facilitate your understanding.
1) Camera setting value on home Monitoring web menu
Name
USB Camera 1 192.168.0.25
tcp
9080-9080
9080-9080
Internal IP Protocol External Port Internal Port
USB Camera 1
Port: 9080(Use a value automatically assigned)
(Encouraged: 9080 ~ 9089)
USB Camera 1 : Because, the USB camera is connected to Network Storage,
it is using the same IP address as the Network Storage.
Therefore, the internal port number must use a different port number
than the number 80 port, which the Network Storage is using.
That is, you should use the port number that is automatically set.
e.g.) Connect to http://10.177.192.69:9080 from an external network -> Automatically
connect to internal network http://192.168.0.25:9080.
2) Set up a router
※
This is an example of how to set a port forward for a router.
Home Monitoring Camera Port Setup
In order to access the installed USB camera in the internal network router from
an external network router, you must set port forwarding on the camera from the
router’s setup menu.