LG Electronics N1T1 Network Hardware User Manual


 
92
Backup Setup
l USB Backup Mode (N2R5/N2B5 Product)
Connect the USB device to the LG Network Storage.
Navigate to the USB Backup Mode and press Set key to enter USB
Backup Modes. This is identical to the one touch backup function.
When the device is recognized the following message will be displayed
with a beep.
To proceed with the Backup press the “Set(S)” button and the (L) “”
button to cancel.
When backup is complete, a folder is created under the manufacturer of
the device under service/backup/usb. It allows the identification between
devices. Another folder is created named by the date under the upper
folder. Regenerate the subfolders according to the date of the backup and
save all of the content of the USB on the LG Network Storage.
When multiple devices are detected, the device that was connected the last will be
backed up.
LG Network Storage provides data saving function on USB devices to the
LG Network Storage through simple control of buttons.
Easy- OneTouch backup
USB Backup Mode
B
Displays the current completion process of the backup in percentage.