LG Electronics PCS150R Computer Monitor User Manual


  Open as PDF
of 26
 
15
206-4157
Configure Video Parameters
This option enables you to view current settings and/or configure new settings, as required.
1. Log in to the PCS150R as described on page 13.
2. At the
Command >
prompt, type video and press Enter.
The system displays the current video parameters and prompts for a selection, for example:
Current video configuration:
1) Program number 47 (default)
2) PMT PID 4096 (default)
3) Video PID 4097 (default)
4) Elementary PID1 4098 (default)
5) Elementary PID2 4099 (default)
6) Elementary PID3 4100 (default)
7) Elementary PID4 4101 (default)
Select parameter to change or press Enter to accept:
3. To return to the
Command >
prompt without making any changes, you can simply press
Enter. Otherwise, select the appropriate option, depending on the parameter you wish to
change:
• Program Number: Type 1 and press Enter to change the video program number.
At the
Enter new value for Program number [47]:
prompt, type a new program
number and press Enter. The system will redisplay the video conguration, showing your
update.
Note: The video channel major number is the RF data channel assigned for Pro:Centric
operation (Installer Menu item 119 DATA CHANNEL) and the video channel minor
(program) number is as congured in this step (default program number = 47). Refer to
Commercial Mode Setup documentation for the TV in question for further information.
• PMT ID: Type 2 and press Enter to change the PMT (Program Map Table) PID (packet
ID).
At the
Enter new value for PMT PID [4096]:
prompt, type the new PMT ID and
press Enter. The system will redisplay the video conguration, showing your update.
• Video PID: Type 3 and press Enter to change the video PID.
At the
Enter new value for Video PID [4097]:
prompt, type the new video
PID and press Enter. The system will redisplay the video conguration, showing your
update.
Note: Assign video and elementary PIDS as necessary according to the system’s
network distribution requirements.
PCS150R Configuration Options (Cont.)
(Continued on next page)
 previous next