Filter
Top Products
23
206-4157
Troubleshooting / Specifications
Specifications
Dimensions
Height: 1.692 inches (42.977 mm)
Width: 19.0 inches (482.6 mm) (for EIA standard 19-inch rack mount)
Depth: 8.5 inches (215.9 mm)
Weight: 3.45 pounds (1.56 kgrms) rack-only weight
Environmental Storage Conditions
Temperature: -20° to 70° Celsius
-4° to 158° Fahrenheit
Humidity: 95% non-condensing
Environmental Operating Conditions
Temperature (Tma): 0° to 40° Celsius
32° to 104° Fahrenheit
Humidity: 95% non-condensing
Electrical
DC Input: +12V DC @ 4.0 Amps
Impedance at ASI Out jack: 75 ohms
Level at ASI Out jack: 800 mv
Ethernet: 10/100/1000BaseT
Note: Design and specications subject to change without prior notice.
Troubleshooting
If the PCS150R is not connecting to the network during system setup, i.e., the Eth0 IP field
in the System Information display (see setup procedure on page 12) is blank:
1. Check the ETHERNET-0 connector on the rear panel of the PCS150R. Make sure the
cable connection is tight and secure.
2. Observe the green LED on the ETHERNET-0 port. Once the PCS150R is connected to
the network, the LED will be lit continuously.
3. Contact the network administrator to verify the network status.