Filter
Top Products
16
206-4157
PCS150R Configuration Options (Cont.)
(Continued from previous page)
• Elementary PID: There are four Elementary PIDs. Type 4, 5, 6, or 7, depending on which
Elementary PID you wish to change, and press Enter.
At the
Enter new value for Elementary PID# []:
prompt, type the new
Elementary PID and press Enter. The system will redisplay the video conguration,
showing your update.
Note: Assign video and elementary PIDS as necessary according to the system’s
network distribution requirements.
4. At the
Select parameter to change or press Enter to accept:
prompt, select
another parameter to change, if desired, and follow the prompts, or press Enter to accept
the displayed conguration parameters and return to the
Command >
prompt.
Configure the TCP/IP Settings
1. Log in to the PCS150R as described on page 13.
2. At the
Command >
prompt, type setip and press Enter.
The system displays an overview of the current TCP/IP network conguration followed by a
Network Conguration Menu, for example:
Current Network Configuration
Interface eth0
Host name: pcs150r
Using DHCP: YES
Interface eth1
Host name: pcs150r
Using DHCP: YES
DNS servers
Primary DNS: 68.94.156.1
Secondary DNS: 68.94.157.1
--------------------------
Network Configuration Menu
--------------------------
eth0 Configure eth0
eth1 Configure eth1
dns Configure dns
exit Exit network configuration
Choose item to modify >
(Continued on next page)