Filter
Top Products
Mechanical Considerations
8
4.0 MECHANICAL CONSIDERATIONS
4.1 Determining Placement in the Conditioned Space
Liebert XDVs should be placed above or on top of the cabinets that generate the greatest amount of
heat. If heat loads are dispersed evenly throughout the room, the Liebert XDV modules may be
spread out accordingly.
The Liebert XDV is engineered to fit atop computer enclosure cabinets. Figure 8, below, illustrates
the unit’s dimensions and the location of pipes, the fan tray and power connections. (An optional kit is
available to permit suspending the Liebert XDV from either Unistruts or from the overhead struc-
ture; see 5.2 - Suspended Mounting Method.).
Figure 8 Liebert XDV dimensions
Table 2 Dimensional data
Illustration
Key Dimension
Measurement,
in (mm)
DT Depth Top 39-1/2 (1003)
DB Depth Bottom 29-5/8 (752)
W Width 22-7/8 (581)
H Height 14 (356)
PH
Piping Height,
hard-piped
18-5/8 (473)
Piping Height,
one-shot option
19-5/8 (498)
DF Depth Front 9-7/8 (250)
DT
DF
PH
H
DB
W
DPN000770
Page 2, Rev. 6
Liebert XDV With
Pre-charged Option
(all dimensions except piping
height are the same as for the
hard-piped setup, see Table 2)
Liebert XDV With Hard-piped Arrangement