Filter
Top Products
English Manual
3.
Fast (RAID 0 Mode):
4.
Safe (RAID 1 Mode):
5. Safe33:
RAID 1 (SAFE 33%) + (BIG 67%), 33% of memory space on both
6. Safe50:
RAID 1 (SAFE 50%) + (BIG 50%), 50% of the memory in both disks
7. GUI ONLY:
Use
data security, we highly recommend using Safe configuration
(RAID 1 mode).
Fast (RAID 0 Mode):
The two physical drives are stripped
together so that one
larger logical volume mounts on the desktop, offering the
maximum possible capacity lik
e in Big mode (the available
capacities of each disk are combined) y
than the Big mode (the speed of each disk runs faster to a
certain level).
Note:
If one drive fails, the data on both disks will become
inaccessible
.
Safe (RAID 1 Mode):
The two physical drives are “mirrored” (RAID 1) so that one
single logical volume mounts on the desktop. All of the data
on one
drive will be recoverable from the other drive (the
available capacity of one drive cannot exceed the available
capacity of the other drive).
Note:
If one physical disk fails, the data can be immediately
recovered from the second disk. No data will be lost
drive fails.
RAID 1 (SAFE 33%) + (BIG 67%), 33% of memory space on both
hard drives will be operating under RAID 1 mode, and the
rest of the hard drive memory on both disks will be assorted
into BIG.
RAID 1 (SAFE 50%) + (BIG 50%), 50% of the memory in both disks
will be RAID 1, and the rest of the hard drive memory on
both disks will be assorted into BIG.
Use
SteelVine Manager Software
to configure
Only under GUI ONLY mode, SteelVine Manage can
change the hard drive memory mode, on other modes,
SteelVine Manager can monitor the hard drive statue, not
change that.
Note
：
Changing the Mobile Rack
policy
，
according to the above seven mode , need to turn
the Mode Select to a new position
which you want to
change
，
then press Mode change
latest storage policy take effect.
After effected, you need to click“My
Computer”
“Management””
Hard drive management
English 4
data security, we highly recommend using Safe configuration
together so that one
larger logical volume mounts on the desktop, offering the
e in Big mode (the available
capacities of each disk are combined) y
et with greater speed
than the Big mode (the speed of each disk runs faster to a
If one drive fails, the data on both disks will become
The two physical drives are “mirrored” (RAID 1) so that one
single logical volume mounts on the desktop. All of the data
drive will be recoverable from the other drive (the
available capacity of one drive cannot exceed the available
If one physical disk fails, the data can be immediately
recovered from the second disk. No data will be lost
if one
RAID 1 (SAFE 33%) + (BIG 67%), 33% of memory space on both
hard drives will be operating under RAID 1 mode, and the
rest of the hard drive memory on both disks will be assorted
RAID 1 (SAFE 50%) + (BIG 50%), 50% of the memory in both disks
will be RAID 1, and the rest of the hard drive memory on
to configure
the HDD Mode.
Only under GUI ONLY mode, SteelVine Manage can
change the hard drive memory mode, on other modes,
SteelVine Manager can monitor the hard drive statue, not
hard drive storage
according to the above seven mode , need to turn
which you want to
button to reset
，
so the
Hard drive management
” then