Filter
Top Products
1
3
7.4 Port Trunking Configuration
Port Trunking Configuration menu controls port trunking or the so called LinkAggregation function. Several ports in the Smart
Switch can be bundled together to form a high-speed trunk. The available choices are listed in the screen once you press
<Add> selection.
For factory default setting, the trunking group list is empty. To set up a new trunk, select the <Add> function. The following
selections list will be shown on screen.
Each item represents a set of ports that can be trunked together. Pressing <Enter> on an item selects the set as a new trunk.
Note that selecting a set of port may cause other sets to be excluded in further selections. More sets can be selected until all
ports are defined.