Filter
Top Products
LINDY Dual/Quad PRO Installation and Use Page 45
Selects the channel specified by {number}. This allows ports on cascaded units to
be selected. For example HOTKEYs + 0 10216 would select port 1 (01) on the
current LINDY Dual/Quad PRO, port 2 (02) on the next cascaded LINDY Dual/Quad
PRO and port 16 on the last LINDY Dual/Quad PRO.
Examples of common hotkey sequences (assuming CTRL + ALT hotkey option):
To select channel 2:
press
baba
22 release 22
baba
To 'tab through' channels:
press
baba
vv
release
vv
press
vv
release
vv
press
vv
release
vbavba
To select channel 12 (on a 12 or 16 port LINDY Quad PRO):
press
baba
11 release 11
press 22 release 22
baba
4.9 Selecting computers using the mouse
Computers may conveniently be selected using a three button mouse. In order to
switch to the next computer simply hold down the central mouse button (the wheel
mouse button on an IntelliMouse) and click on the left hand mouse button to select
the next computer. If password security has been set then the LINDY Dual/Quad
PRO will select the next available channel, otherwise it will select the next numerical
channel. Mouse switching may be enabled or disabled (see section 3.6.7). When
mouse switching is disabled the third button or wheel button state is ‘passed
through’ the LINDY Dual/Quad PRO and seen by the application software.
Selecting computers using the mouse is most suitable for systems with small
numbers of computers. For systems with more computers it is easier to use the on-
screen menu for computer selection.