Filter
Top Products
LINDY Dual/Quad PRO Installation and Use Page 59
2. Copy the program DQPWRITE and DQPDATA.CSV into the same directory on
the PC that is connected to the CPU Switch’s serial port.
3. Run the program DQPWRITE.EXE and follow the instructions given by the
program.
4. Make sure that you are logged onto the CPU Switch as the ADMIN user. From
the main selection screen press F1 for More Menus. In the Configuration Menu
select Functions. In the Functions menu select Read Data from RS232 port.
5. The CPU Switch should then receive the configuration data to your computer
and load the new menu names and access rights into the menu.