Filter
Top Products
English Manual
8
Step 4 – Resetting the Switches
After you have connected and switched on the SLAVE CPU switches and computers, all of the
CPU switches must be reset. First, reset the SLAVE CPU Switch at the end of the daisy chain
and then reset all of the other SLAVE switches up to the MASTER CPU switch.
To reset the switch, press and hold the Bank button and P4 or P8 button (depending on model)
on the front panel of the switch.
Each SLAVE switch should now show a dash in its BANK display.
Now, reset the MASTER switch - it will show a 1 in the BANK display. Each SLAVE switch
BANK display will now change to a number according to its position in the daisy chain.