Filter
Top Products
Page 16 Installation and Use LINDY CPU Switch USB
2.4 Configuring the LINDY CPU Switch USB
The LINDY CPU Switch USB is supplied pre-configured with factory defaults which
are suitable for most applications. A row of option switches on the underside of the
LINDY CPU Switch USB may be used to select various other configuration options
as follows:
Reserved - set OFF
ON
OFF
1 2 3 4 5 6 7 8
Scan all ports
Scan active ports only
(default)
Autoscan dwell time
= 5 seconds
Autoscan dwell time
= 2 seconds (default)
Enumeration ’guard time’
= 16 seconds
Enable mouse switching
of channels (default)
Disable mouse
switching of channels
Swtches 1 to 4 are only
applicable to the
LINDY CPU Switch USB 32 341
Hotkeys
disabled
= ON
= OFF
Enumeration ’guard time’
= 8 seconds
Enumeration ’guard time’
= 4 seconds
Enumeration ’guard time’
= 2 seconds (default)
Hotkeys =
ALT + SHIFT
Hotkeys =
CTRL + SHIFT
Hotkeys =
CTRL + ALT
(default)