Filter
Top Products
Page 28 Installation and Use LINDY CPU Switch USB
if you wish to extend the distance between the LINDY CPU Switch USB and the
monitor then you may use a tri-coax video extension cable. This cable should
preferably be no longer than 10 metres although cable runs up to 20 metres long
may also give acceptable video quality.
A3. PS/2 style keyboard and mouse extension cables
PS/2 style keyboards and mice will plug directly into the LINDY CPU Switch USB
model 32 341. If required the keyboard and mouse may be located further away
from the LINDY CPU Switch USB with the aid of extension cables. Extension cables
should be terminated with 6 pin mini-DIN PS/2 style connectors, with a male
connector on one end and a female connector on the other end. All pins on the
extension cable should be wired straight through (1 to 1, 2 to 2, 3 to 3 etc.). Such
extension cables may be up to 10 metres long. Most keyboards and mice will also
work with a 20 metre extension cable.
A4. Remote controller extension cables
The remote controller is supplied as standard with a 3 metre long lead. This
distance may be extended with the use of suitable shielded extension cable. This
extension cable may be up to 20 metres long and should be wired so that all pins
are connected straight through (1 to 1, 2 to 2, 3 to 3 etc.). Remote controllers with
longer leads are also available from your supplier.