Filter
Top Products
Troubleshooting English
19
2. Create a User account and include levels of authority.
3. Assign the NAS Enclosure the static IP Address supplied by your ISP, using the instructions
from Section 11 of this guide.
4. Open Microsoft Internet Explorer or any other FTP software, and enter ftp:// and then the IP
Address used in step 3 in the address field. E.g.: ftp://192.176.54.24
Q: What types of hard disks are compatible to work with the NAS ENCLOSURE?
A1: Hard disks have to support Ultra DAM compatible with Ultra 33, 66, 100, 133.
A2: Support LBA frame, up to the maximum IDE format 2TB(2,048GB).
A3: The File format has to be FAT32, with single files having a 4GB maximum limit. If you insert a
hard disk which is already formatted to FAT16 or NTFS, you will need to format it again
according to the NAS ENCLOSURE internal format function.
A4: The NAS ENCLOSURE supports hard disks with only one partition.
Q: Does the NAS ENCLOSURE support Hard disk Power Management?
A: The NAS ENCLOSURE uses standby mode for power management (Sleep time) if there is no
activity during a specified range (user defined: 5-60 minutes). To set this feature up log in to the
web interface of the NAS Enclosure and select Disk Utility > Set Sleep Time function choose
0 to disable function or from the range 5-60 minutes to enable the function.