Filter
Top Products
User Manual English
6
3. Password Change
In the Administration mode, you can choose your own password for entering the setup
mode. Now you are ready to connect the NAS Enclosure to your Network.
4. Connect the NAS Enclosure Via Ethernet.
Connect an Ethernet cable to the Ethernet port of your NAS Enclosure.
Connect the other end of the Ethernet cable to your Network Router.
Switch on your NAS Enclosure; it may take a few second for your network to recognise the
NAS Enclosure.
Please Note:
After changing the password you will be logged off and then be prompted to log in using
your new password.
Important Information:
Make sure that the computer you will be using to configure the NAS Enclosure is on the
same network (or same subnet) as the NAS Enclosure.