Filter
Top Products
Compact USB 2.0 10/100 Network Adapter
5. When Windows has completed copying the driver files, click the Finish
button.
6. When asked if you want to restart your computer, remove the Driver CD
from the CD-ROM drive, and click the Yes button. If Windows does not ask
you to restart your PC, click Start. Click Shut Down, and select Restart.
Then click the OK button.
Congratulations! The installation of the Compact USB 2.0 10/100
Network Adapter is complete.
To enable file and printer sharing, go to the next section,
“Windows Millennium Network Configuration.”
17
Instant EtherFast
®
Series
3. Select Search for the best driver for your device (Recommended). You
MUST remove the checkmark from the box next to Removable Media.
Select Specify a location:, and enter D:\winME in the field provided. Then
click the Next button.
4. When Windows notifies you that it is ready to install the driver files, click
the Next button to continue.
16
Figure 6-4
Note: Do not click Cancel at any time during the installation
process. Doing so will prevent your driver from being properly
installed on your PC.
Figure 6-2
Figure 6-3