Filter
Top Products
Compact USB 2.0 10/100 Network Adapter
6. Windows will begin copying the driver files to your computer. If Windows
asks you for the original Windows CD-ROM, insert the CD-ROM, and
direct Windows to the proper location for the CD-ROM (e.g., D:\). If you
have the Windows 98 setup files already installed in a directory, click OK,
and enter C:\windows\options\cabs (if “C” is the letter of your hard drive)
in the windows that appears. When Windows has completed copying the
files, click the Finish button.
7. When asked if you want to restart your computer, remove the Driver CD
from the CD-ROM drive, and click the Yes button. If Windows does not ask
you to restart your PC, click Start. Choose Shut Down, and select Restart.
Then click the OK button.
Congratulations! The installation of the Compact USB 2.0 10/100
Network Adapter is complete.
To enable file and printer sharing, go to the next section,
“Windows 98 Network Configuration.”
9
Instant EtherFast
®
Series
8
Figure 5-4
4. Select Specify a location: to find the correct driver, and enter D:\win98 in
the field provided. Click the Next button to continue.
5. When Windows notifies you that it is ready to install the driver files, click
the Next button to continue.
Note: Do not click Cancel at any time during the installation
process. Doing so will prevent your driver from being properly
installed on your PC.
Figure 5-2
Figure 5-3