Filter
Top Products
92
Chapter 5: Using the Web-based Utility for Configuration
Admin Tab - Factory Defaults
WebView Switches
Admin Tab - Factory Defaults
The Factory Reset screen allows network managers to reset the device to the factory defaults shipped with the
switch. Restoring factory defaults results in erasing the configuration file.
Admin Tab - Server Logs
The Server Logs screen contains information for viewing and configuring the Remote Log Servers. New log
servers can be defined, and the log severity sent to each server.
Server. Specifies the server to which logs can be sent.
UDP Port (1-65535). Defines the UDP port to which the server logs are sent. The possible range is 1 to 65535. The
default value is 514.
Facility. Defines a user-defined application from which system logs are sent to the remote server. Only one
facility can be assigned to a single server. If a second facility level is assigned, the first facility is overridden. All
applications defined for a device utilize the same facility on a server. The field default is Local 7. The possible
field values are Local 0 - Local 7.
Description. Provides a user-defined server description.
Minimum Severity. Indicates the minimum severity from which logs are sent to the server. For example, if
Notice is selected, all logs from a Notice severity and higher are sent to the remote server.
The Add to List button adds the Server Log configuration to the Server Log Table at the bottom of the screen.
Figure 5-72: Admin - Factory Defaults
Figure 5-73: Admin - Server Logs
NOTE: Restoring the factory defaults will erase all configuration settings that you have made.
You can save a backup of your current configuration settings from the Admin - Save Configuration
screen.