Filter
Top Products
87
Chapter 5: Using the Web-based Utility for Configuration
Admin Tab - Dynamic Address
WebView Switches
VLAN ID. Specifies the VLAN ID for which the table is queried.
Address Table Sort Key. Specifies the means by which the Dynamic MAC Address Table is sorted. The address
table can be sorted by address, VLAN, or interface.
Admin Tab - Dynamic Address
The Dynamic Address Table contains the MAC addresses learned by monitoring the source address for traffic
entering the switch. When the destination address for inbound traffic is found in the database, the packets
intended for that address are forwarded directly to the associated port. Otherwise, the traffic is flooded to all
ports.
The Dynamic Address screen contains parameters for querying information in the Dynamic MAC Address Table,
including the interface type, MAC addresses, VLAN, and table storing. The Dynamic MAC Address table contains
information about the aging time before a dynamic MAC address is erased, and includes parameters for querying
and viewing the Dynamic MAC Address table. The Dynamic MAC Address table contains address parameters by
which packets are directly forwarded to the ports. The Dynamic Address Table can be sorted by interface, VLAN,
and MAC Address.
Address Aging. Specifies the amount of time (in seconds) the MAC address remains in the Dynamic MAC
Address table before it times out, if no traffic from the source is detected. The default value is 300 seconds.
Clear Table. If checked, clears the MAC address table.
Query
Port. Specifies the interface for which the table is queried. There are two interface types from which to select.
• Port. The specific port number.
• LAG. The specific LAG number.
MAC Address. Specifies the MAC address for which the table is queried.
VLAN ID. Specifies the VLAN ID for which the table is queried.
Address Table Sort Key. Specifies the means by which the Dynamic MAC Address Table is sorted. The address
table can be sorted by address, VLAN, or interface.
Figure 5-65: Admin - Dynamic Address