Filter
Top Products
44
Chapter 5: Using the Web-based Utility for Configuration
VLAN Management Tab - GVRP
WebView Switches
VLAN Management Tab - GVRP
GARP VLAN Registration Protocol (GVRP) is specifically provided for automatic distribution of VLAN membership
information among VLAN-aware bridges. GVRP allows VLAN-aware bridges to automatically learn VLANs to
bridge ports mapping, without having to individually configure each bridge and register VLAN membership.
The Global System LAG information displays the same field information as the ports, but represents the LAG GVRP
information.
The GVRP screen is divided into two areas, GVRP and GVRP Table. The field definitions for both areas are the
same.
Enable GVRP. Enables and disables GVRP on the device.
Interface. DIsplays the interface on which GVRP is enabled. The possible field values are:
• Port. Indicates the port number on which GVRP is enabled.
• LAG. Indicates the LAG number on which GVRP is enabled.
GVRP State. When the checkbox is checked, GVRP is enabled on the interface.
Dynamic VLAN Creation. When the checkbox is checked, Dynamic VLAN creation is enabled on the interface.
GVRP Registration. When the checkbox is checked, VLAN registration through GVRP is enabled on the device.
The Update button adds the configured GVRP setting to the table at the bottom of the screen.
Figure 5-15: VLAN Management - GVRP