Filter
Top Products
6
Chapter 3: Getting to Know the Wireless-G Broadband Router with RangeBooster
The Back Panel
Wireless-G Broadband Router with RangeBooster
Chapter 3: Getting to Know the Wireless-G Broadband
Router with RangeBooster
The Back Panel
The Router's ports, where the cables are connected, are located on the back panel.
Reset Button There are two ways to reset the Router's factory defaults. Either press the Reset Button,
for approximately five seconds, or restore the defaults from the Administration tab -
Factory Defaults in the Router's Web-based Utility.
Internet The Internet port is where you will connect your broadband Internet connection.
Ethernet 1, 2, 3, 4 These ports (1, 2, 3, 4) connect the Router to your networked PCs and other Ethernet
network devices.
Power The Power port is where you will connect the power adapter.
IMPORTANT: Resetting the Router will erase all
of your settings (Internet connection, wireless
security, and other settings) and replace them
with the factory defaults. Do not reset the Router
if you want to retain these settings.
Figure 3-1: The Router’s Back Panel