Filter
Top Products
22
Chapter 5: Configuring the Wireless-G Access Point with Power Over Ethernet
The Wireless - Advanced Wireless Settings Tab
Wireless-G Access Point with Power Over Ethernet
Fragmentation Threshold. This specifies the maximum size a data packet can be before splitting and creating
a new packet. It should remain at its default setting of 2346. A smaller setting means smaller packets, which will
create more packets for each transmission. If you have decreased this value and experience high packet error
rates, you can increase it again, but it will likely decrease overall network performance. Only minor modifications
of this value are recommended.
Output Power. You can adjust the output power of the Access Point to get the appropriate coverage for your
wireless network. Select the level you need for your environment. If you are not sure which setting to choose,
then keep the default setting, 100%.
Change these settings as described here and click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. Click Help for more information.
fragmentation: breaking a packet into smaller units
when transmitting over a network.