Filter
Top Products
30
Chapter 5: Configuring the Wireless-G Access Point with Power Over Ethernet
The Administration - Language Upgrade Tab
Wireless-G Access Point with Power Over Ethernet
The Administration - Language Upgrade Tab
On this screen you can do a language upgrade to change the language used by the Access Point’s Web-based
Utility.
Language Upgrade
If you do want to change the language currently used by the Web-based Utility, then you can download a
language upgrade file and update the Access Point.
To change the Access Point’s language:
1. Download the language upgrade file from the Linksys website, www.linksys.com.
2. Extract the language upgrade file on your computer.
3. On the Language Upgrade screen, enter the location of the language upgrade file in the field provided, or click
the Browse button to find the file.
4. Click the Upgrade button, and follow the on-screen instructions.
Click Help for more information.
The Administration - Reboot Tab
On this screen you can reboot the Access Point.
Reboot
This feature is useful when you need to remotely reboot the Access Point.
Device Reboot. To reboot the Access Point, click the Yes radio button. Otherwise, click the No radio button.
Change these settings as described here and click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. Click Help for more information.
Figure 5-20: Administration - Language Upgrade Screen
Figure 5-21: Administration - Reboot Screen
NOTE: Not all languages are available. Check
the Linksys website for available language
upgrade files.