Filter
Top Products
32
Chapter 5: Configuring the Wireless-G Access Point with Power Over Ethernet
The Status - Local Network Tab
Wireless-G Access Point with Power Over Ethernet
The Status - Local Network Tab
The Local Network screen displays the Access Point’s current status information for the local network.
Information
Hardware Version. This is the version of the Access Point’s current hardware.
Software Version. This is the version of the Access Point’s current software.
Local MAC Address. The MAC address of the Access Point’s Local Area Network (LAN) interface is displayed
here.
System Up Time. This is the length of time the Access Point has been running.
Local Network
IP Address. This shows the Access Point’s IP Address, as it appears on your local network.
Subnet Mask. This shows the Access Point’s Subnet Mask.
Default Gateway. Displayed here is the IP address of the Access Point’s Default Gateway.
Primary and Secondary DNS. DNS addresses used by the Access Point are displayed here.
To update the status information, click the Refresh button. Click Help for more information.
Figure 5-23: Status - Local Network Screen