Filter
Top Products
Chapter 6
Advanced Configuration
20
Wireless-G Business Ethernet Bridge
Administration > Firmware Upgrade
Administration > Firmware Upgrade
This screen allows you to upgrade the Bridge’s firmware
after you have downloaded a new firmware file from the
Linksys website. Firmware should only be upgraded if you
experience problems with the Bridge.
Enter the name of the firmware file or click Browse to
locate the file on your computer, then click Upgrade to
begin the upgrade.
System Status
The System Status tab displays the Bridge’s current status
and configuration information. These screens only display
information and cannot be used to change any settings.
System Status > System Status
This is the System Status tab’s default screen. It displays
basic status information for the Bridge.
System Status > System Status
System Up Time The Bridge’s live time.
Firmware Version The version number of the currently
installed firmware.
MAC Address The MAC address currently assigned to the
Bridge.
LAN Settings The basic LAN settings.
IP Address, Subnet mask • The Bridge’s IP address and
subnet mask.
Gateway • The IP address of the Bridge’s gateway.
Click Refresh to display the most current information.
System Status > Wireless Status
This screen displays status information for the Bridge’s
wireless network.
System Status > Wireless Status