Filter
Top Products
Click the Logical Printers tab to view or change the logical printer settings of
the Wireless PrintServer.
For each Logical Printer, the following fields are available:
Logical Printer(Port) - Select the Logical Printer Port you wish to configure.
(L1 to L8). Click the Get Data button to update the display with the current
data for the selected logical printer.
Port - Select the Printer Port which the Logical printer will use.
Pre-string - The printer control string (in hex) to be sent to the printer before
each print job. This string cannot exceed 30 characters.
Post String - The printer control string (in hex) to be sent to the printer after
each print job. This string cannot exceed 30 characters.
Convert LF to CR+LF - If checked, LF (line feed) characters are changed to
CR+LF (carriage return + line feed).
If you make any mistakes, you can simply hit the Cancel button, which will
exit the screen without making any changes. Once you are certain of any
changes you have made, click the Save button to implement the changes.
The Logical Printers Page
28
Wireless PrintServer
27
Click the Internet
Printing tab to view or
change the Internet
Printing values of the
Wireless PrintServer.
Internet Printing allows
you to automatically
print any e-mails that
are sent to a specific e-
mail account on your
network. This is espe-
cially useful for print-
ing information when
you are not connected
to the network. You can
print from anywhere
that you can access e-
mail.
The Mail Server IP Address is where you will enter the address of your mail
server. (This value must be a fixed IP address.) The Account Name and
Account Password must be entered next. Enter the password again to Verify
Password. Then, enter the time interval for the Wireless PrintServer to check
for e-mail to be printed, in hours and minutes in the Check Mail every: box.
You may even specify an e-mail address where mails that cannot be printed are
routed, which is useful for both graphic-intensive e-mails and for troubleshoot-
ing purposes. Enter this e-mail address in the Redirect unprintable Mail to:
box.
Under the Printer settings, enter the Printer Model in the box provided. You
can find this in the Device Manager. Then choose the Printer Port from the
drop down box.
Then, choose from the Options by placing a check mark next to your prefer-
ences. You can Print every E-Mail, choose to Print Banner Pages (default),
or Mail response when printed.
If you make any mistakes prior to saving, you can simply hit the Cancel but-
ton, which will exit the screen without making any changes. Once you are cer-
tain of any changes you have made, click the Save button to implement the
changes.
The Internet Printing Page
NNoottee::
Linksys does not provide any technical support for problems with IPP.
Instant Wireless™ Series