Filter
Top Products
1. To begin driver installation, click the Start button, select Run, and type
D:\Driver\Win9xnt\AddPort_Linksys.exe (where D is the letter of your
CD-ROM drive) in the Open field that appears. Click the OK button.
2. The Install Wizard window appears. Read the text that appears and click
the Next button.
The Autorun Bi-Admin Management Utility Installation
7
NNoottee
: To set up DHCP on the Wireless PrintServer, install
BBii--
AAddmmiinn
first, and then install
DDHHCCPP
. Once these are done, pro-
ceed to install the Printer Driver.
Windows Driver Setup
This section installs the Wireless PrintServer’s software on your Windows 95,
98, Millennium, NT, 2000 or XP computers to give them Wireless PrintServer
printing abilities. The Wireless PrintServer is fully compatible with Windows
95, 98, Millennium, NT 4.0, 2000 and XP environments.
At this point, you must have:
• the Wireless PrintServer hardware installed on your network. If not, see the
Hardware Installation section.
• TCP/IP installed on each of your computers.
• an IP address assigned to each of the computers on your network. If not, see
the section on DHCP Support for the Wireless PrintServer.
This setup should be completed on the network administrator’s computer
before all other users’ computers on the network. The Wireless PrintServer’s IP
address will be assigned in this first installation on the network administrator’s
computer only, which takes three extra steps.
It is assumed that your CD-ROM drive’s letter name is designated as D. If your
CD drive is named another letter, replace all instances of D with the appropri-
ate letter.
If you need to install the Wireless PrintServer’s driver on computers without a
CD-ROM drive, you can create a setup disk by using a computer with a CD-
ROM drive to copy the contents of D:\Driver\Win9xNT onto a floppy disk.
Overview
Instant Wireless™ Series
8
Wireless PrintServer