Filter
Top Products
38
DHCP Support for the Wireless
PrintServer
To use DHCP, which assigns non-static IP addresses, you must have a DHCP
server and DHCP management software. Otherwise, the Wireless PrintServer's
IP address will remain unknown, and connecting to it will impossible. In this
case, ignore DHCP and configure the Wireless PrintServer for a static IP
address as described in previous sections.
To enable DHCP, you must run the Bi-Admin program. When Bi-Admin loads,
it scans the network for PrintServers and displays a list of PrintServers.
Highlight the Wireless PrintServer to be set up, enter the Wireless PrintServer’s
password if one has been assigned, and click OK.
After entering the program and selecting the Wireless PrintServer to be con-
figured, click on Configuration in the menu and choose TCP/IP from the
drop-down field. The TCP/IP Configuration window will appear. Select
Enable to enable DHCP, then click Save to Device. You can exit the Bi-Admin
program. To install the Wireless PrintServer driver, see the section on Windows
Driver Setup.
NNoottee::
For help with the Internet Mail Printing Configuration features, see
the guide in D:\Not_supp\Manual directory on the Wireless PrintServer’s
Setup CD. Linksys does not provide technical support for this option.
Wireless PrintServer
6. Click Next and complete the Wizard.
The IPP printer is now ready for use.
Using IPP Printers
The IPP Printer can be selected and used like any other Windows printer. If the
IPP Server is not on your network, your Internet connection needs to be active.
If you wish to check the availability of the remote IPP Server, you can use the
Query IPP Printer program installed with Add IPP Port.
An IPP Server may be unavailable for any of the following reasons:
· It is powered off.
· A printer problem has caused the IPP Server to cease responding, and a
restart (reboot) is required.
· The Server's IP Address has changed.
· The Internet connection for the IPP Server is down.
· Network congestion causes the connection attempt to time out.
If using the supplied IPP Client software, there are two settings - Retry Interval
and Retry Count - which can be adjusted if you have problems connecting to
the IPP Server.
See the previous section Changing the IPP Port Settings for details.
37
Instant Wireless™ Series