Filter
Top Products
21
Chapter 5: Configuring the Wireless-N Gigabit Gaming Router
The SETUP Tab - MAC ADDRESS CLONE
Wireless-N Gigabit Gaming Router
The SETUP Tab - MAC ADDRESS CLONE
A MAC address is a 12-digit code assigned to a unique piece of hardware for identification, like a social security
number. Some ISPs will require you to register a MAC address in order to access the Internet. If you do not wish
to re-register the MAC address with your ISP, you may assign the MAC address you have currently registered with
your ISP to the Router with the MAC Address Clone feature.
Mac Cloning
To use MAC address cloning, select Enable. Otherwise, keep the default, Disable.
MAC Address. Enter the MAC Address registered with your ISP.
ClonePC’s MAC Address. If you want to clone the MAC address of the PC you are currently using to configure the
Router, then click this button. The Router will automatically detect your PC’s MAC address, so you do NOT have to
call your ISP to change the registered MAC address to the Router’s MAC address. It is recommended that the PC
registered with the ISP is used to open the MAC Address Clone screen.
When you have finished making changes to this screen, click SAVE SETTINGS to save the changes, or click
CANCEL CHANGES to clear all fields and start over.
mac address: the unique address that a
manufacturer assigns to each networking device.
Figure 5-9: SETUP Tab- MAC ADDRESS CLONE