Filter
Top Products
viii Preface
Copyright © 2009 by LSI Corporation. All rights reserved.
• Make sure that equipment does not rest on your computer system
cables and that the cables are not located where they can be
stepped on or tripped over.
• Do not spill food or liquids on your computer. If the computer gets
wet, consult the documentation that came with it.
• Do not push any objects into the openings of your computer. Doing so
can cause fire or electric shock by shorting out interior components.
• Keep your computer away from radiators and heat sources. Also, do
not block cooling vents. Avoid placing loose papers underneath your
computer; do not place your computer in a closed-in wall unit or on
a rug.
When Working Inside Your Computer –
Caution:
Do not attempt to service the computer system yourself,
except as explained in this document and elsewhere in LSI
documentation. Always follow installation and service
instructions closely.
1. Turn off your computer and any peripherals.
2. Disconnect your computer and peripherals from their power sources.
Also disconnect any telephone or telecommunications lines from
the computer.
Performing these actions reduces the potential for personal injury or
shock. Also note these safety guidelines:
– When you disconnect a cable, pull on its connector or on its
strain-relief loop, not on the cable itself. Some cables have a
connector with locking tabs. If you are disconnecting this type of
cable, press in on the locking tabs before you disconnect the
cable. As you pull connectors apart, keep them evenly aligned to
avoid bending any connector pins. Also, before you connect a
cable, make sure that both connectors are correctly oriented and
aligned.
– Handle components and cards with care. Do not touch the
components or contacts on a card. Hold a card by its edges or
by its metal mounting bracket. Hold a component, such as a
microprocessor chip, by its edges, not by its pins.