Filter
Top Products
Preface ix
Copyright © 2009 by LSI Corporation. All rights reserved.
Protecting Against Electrostatic Discharge – Static electricity can
harm delicate components inside your computer. To prevent static
damage, discharge static electricity from your body before you touch any
of your computer’s electronic components, such as the microprocessor.
To discharge static electricity, touch an unpainted metal surface, such as
the metal around the card-slot openings at the back of the computer.
As you continue to work inside the computer, periodically touch an
unpainted metal surface to remove any static charge that your body
might have accumulated. In addition to the preceding precautions, you
also can take the following steps to prevent damage from electrostatic
discharge:
• When unpacking a static-sensitive component from its shipping
carton, do not remove the component from the antistatic packing
material until you are ready to install the component in your
computer. Just before unwrapping the antistatic packaging, be sure
to discharge static electricity from your body.
• When transporting a sensitive component, first place it in an
antistatic container or packaging.
• Handle all sensitive components in a static-safe area. If possible, use
antistatic floor pads and workbench pads.