Filter
Top Products
3.75 pc 10.25 pc 11.25 pc 38.25 pc
4.333 pc
48.583 p
c
52.5 pc
34.5 pc
44.25 pc
Detailed Installation Procedure 2-15
2.2.5 Making External SCSI Bus Connections
This section provides step-by-step instructions about making external
SCSI bus connections. To connect external SCSI devices to the
LSIU160:
Step 1. Plug the 68-pin HD connector on one end of a shielded external
SCSI cable (see Figure 2.3) into the host adapter connector J3
(see Figure 2.1).
This connector is in the bracket attached to the back panel of
your computer. Figure 2.9 shows how this connection is made.
Figure 2.9 External Cable to Host Adapter
HD Connector