Filter
Top Products
29
ENGLISH
The picture presently on the screen can be saved to memory as a still image. The saved image can then be shown
alongside a moving image in a split screen (index window).
Using the INDEX WINDOW function (PT-L6510E only)
1. Select the “INDEX WINDOW” from menu
and press the “ENTER” button.
2. Change the picture height with the or
button.
• The picture height can be changed at a
magnification of x1, x1.5, or x2.0 times.
3. The still and motion images can be
swapped with the or button.
4. Press the “ENTER” button to save the
split screen image to memory as an index
window image.
Note
• The aspect ratio of each half of the split screen is
2:3, with the image height extended by 1.5 times
the normal height by default.
Caution
• As you change the screen size, the aspect ratio of the picture also changes. Carefully read the caution for S1
signals on page 33 before changing the screen size.
Note
• When you execute steps 2 and 3 above, the memory is temporarily cleared and the index window image is
saved to memory.
• If the input signal format is changed while an index window is on the screen, the projector will exit the index
window mode.
Still
image
Moving
image
ESC
Still
image
Moving
image
ESC
Still
image
Moving
image
ESC
Still
image
Moving
image
ESC
Still
image
Moving
image
ESC
Still
image
Moving
image
x 1 x 1,5
(Standard)
x 2
ESC