Filter
Top Products
4.3 Positioning and Turning on the Lamps
You can use the lamps on the both sides of the Digital Presenter for
auxiliary lighting by following some simple steps：
1. Press and slide the latches to release the lamp lock.
2. Pull up the lamp arms.
3. Rotate the folded lamp to face the platform as the
arrow shows. (Refer to figure 4-1)
4. Press the lamp button of control panel and remote control to switch
the side lamp or backlight.
※ Note： The angle of the lamp arm/lamp head is limited.
Do not turn it forcefully when it reaches the maximal angle
4.4 Using the Mouse
You can also control the Digital Presenter by a PS2 mouse (see the figure
3-3 for PS2 connection). For example, you can move the cursor to adjust
the settings or use the cursor as a pointer for Presenter.
¾ Mouse Keys
The left key functions as Enter. The right key is used for activating the
menu. The central key/bar (when available) is for moving your
selection on the menu.
4.5 Using USB and RS232
¾ USB
You can transmit images to computer via USB interface. To enhance
USB transmission, make sure that your PC supports USB protocol (the
Digital Presenter is based on USB 1.1). An updated driver is available
on the Lumens website (
http://www.lumens.com.tw/)
¾ RS232
RS232, a kind of serial protocol, facilitates remote control functions.
For example, you can control the Digital Presenter installed in a
conference room from a PC in another building via RS232.
English - 13