Filter
Top Products
4.6 Using Ethernet
The Digital Visualizer can be controlled via the internet.
1. Please connect the RJ-45 to Ethernet port (refer to the 3.3
I/O connection)
2. Select the setting of DHCP, IP, Net Mask and Gate Way.
Please refer to the 5.4 Network setting steps.
3. Open the Internet Browser and key in the IP in the address
field. The remote control will be shown as following then you
can control the main unit remotely via internet.
Note※ ：If you can’t use the Ethernet , please consult the network or MIS
administrator to get help
English - 14