Filter
Top Products
Layer 1 Layer 2 Layer 3 Content
Point Color Red / Green / Blue Select the cursor’s color
Drawing Type Frame / Line
Video Format Auto / NTSC / PAL
Language
English / Deutsch /
Francais / Italiano/
Eapanol / Русский /
/
Select your native language
Factory Reset Enter / Exit Reset all default setting
Setting
Preset Save/load
Save/load setting
parameters
DHCP Enable / Disable
Set DHCP (Dynamic Host
Configuration Protocol)
IP Set IP address
Net Mask Set Net Mask value
Advance
Gate Way Set Gate Way value
The OSD menu is shown as below when the Input Source from PC
Layer 1 Layer 2 Content
Clock Set the clock
Phase Set the phase
H-Position Set the image horizontal position
V-Position Set the image vertical position
Brightness Set the image brightness
Contrast Set the image contrast
PC Input
Auto Image
Auto. set clock & Phase & Position & Brightness
& Contrast
English - 21