Filter
Top Products
Reference Manual R FR 5010 Version1.4
Page 16
Rear Termination Panel
The R FR 5010/ R FR 5011 has an integral termination
panel on the rear of the rack for the connection of
power and various other connections for expansion
and interfacing. Figure 5
Figure 5 Rear Panel Connections
Rack Connections
Power Connection
There are two power connections provided for the
rack. One is for primary power and the other for the
optional redundant power supply. Input power
range is 100 to 240VAC 50 to 60Hz. Connection is
made using an IEC power cable. For systems
without redundant power connection is made to
AC1 in only. The power fuse is in the connector
assembly (Figure 5) and removal of this small
module will enable fuse exchange. Please ensure
you use the correct fuse rating. (2A).