Filter
Top Products
Reference Manual R FR 5010 Version1.4
Page 21
LAN Connection
This is a standard RJ48 connection and is used to
provide standard TCP/IP network control
connectivity into a control system. To be
operational this port requires the R CT 5030 Master
Controller is fitted to the rack. Please see the
reference manual for the R CT 5030 for more details
on the use of this connection
External Sync Connection
An external sync reference (loop through
connection) can be connected for the rack. This
provides a common genlock reference for the
modules installed in the chassis. Sync signal can be
black or composite analog sync NTSC or PAL. This is
to provide a common reference to all modules
installed in the rack and can simplify the distribution
of the reference signal in some system applications.
15
6 9
Fi
g
ure 8. Control Connector