Filter
Top Products
4
6. The LN9101M Motorized Sled uses bearings made
from specialized permanently lubricated materials.
Keep the rail linear bearing clean, dry, and con-
taminant free. Do not apply any lubricants to the
Motorized Sled as this will gum up the mechanism
and possibly produce a film on the projector and
anamorphic lenses.
In case the LN9101M Sled is accidentally soiled
(i.e. spilled soda), clean all contaminants with
distilled water first and allow it to dry. Then wipe it
down with denatured alcohol. The LN9101M should
never be operated unless the mechanism is com-
pletely dry, as it relies upon clean and dry rails to
operate smoothly.
7. The assembly and adjustemnt of LN9101M/EXT10/
MT20 will require a Phillips head screw driver, ad-
justable wrench, 5/32 and 3/16 allen tools.
8. When the symbol illustrated here is located on
the product or on the packaging, it
indicates the product must not be
disposed of with your other household
waste. Instead, it is your responsibility
to dispose of your waste equipment by
handing it over to a designated col-
lection point for the recycling of waste electrical
and electronic equipment. The separate collection
and recycling of your waste equipment at the time
of disposal will help to conserve natural resources
and ensure that it is recycled in a manner that
protects human health and the environment. For
more information about where you can drop off
your waste equipment for recycling, please con-
tact your local city office, your household waste
disposal service or the Marantz Dealer where you
purchased the product.
Important Information
Table of Contents
Safety Instructions ....................................................2
Thank You and Please Take a Moment ....................2
Technical Assistance and Customer Service ...........2
Table of Contents ......................................................
3
Important, Connector and Cable Information ...........4
Dimensions ...............................................................5
Installation Overview ................................................5
Installation ............................................................ 5-9
Alignment .................................................................9
Specifications .........................................................10
Warranty .................................................................11
CAUTION: The lenses contained in this product
are extremely delicate precision op-
tics, and may be scratched or other-
wise damaged by physical contact
with external objects of any kind. It is
therefore essential to avoid any such
contact, or any other mistreatment of
the lenses. Scratches or other exter-
nally caused damage to lenses that
are deemed to have arisen through
neglect or misuse, are excluded from
protection under the Marantz Limited
Warranty.
1. The LN9101M Power Supply Adapter should not
be connected to the LN9101M Motorized Sled or to
the AC Power Wall Outlet until the physical mount-
ing of the Marantz VP-11, LN9101M Anamorphic
Lens System and MT20/EXT10 Mounting Brackets
is completed.
2. For additional connection information, refer to the
owner’s manual(s) for any component(s) connect-
ed to the LN9101M Anamorphic Lens System.
3. The LN9101M Anamorphic Lens is designed to
produce the best possible images when a curved
Anamorphic Projection Screen is used, contact
your Marantz Dealer for additional information.
4. The Anamorphic Lens is a precision optical device
with special coatings just like you would find on
Professional Cameras. In the event the Lens re-
quires cleaning to remove airborne particles such
as dust and dirt from the Lens, use a safe cleaning
product such as a clean and dry 3M
TM
Scotch-
Brite
®
Microfiber Lens Cleaning Cloth. At no time
should ordinary household cleaning products be
used to clean the Lens, as damage will occur.
5. To protect the lens surfaces from accidental dam-
age during the installation process DO NOT RE-
MOVE THE LENS COVERS UNTIL INSTRUCT-
ED
.
Trigger Connectors
The LN9101M Trigger In/Out Jacks Receive/Send a
+12VDC Signal to Activate/
Deactivate the Anamorphic
Lens. A 1/8 inch (3.5mm)
stereo mini phone plug is used
for connections.
IR Connectors
The LN9101M IR In Port uses a 2.5mm quad mini
phone plug and allows connec
-
tion of other brand IR Receivers
to the LN9101M.
Connector and Cable Information
+12V DC
(Trigger
Control)
Ground
N/C
IR
Signal
+5V
Gnd
NC