Marantz VP-11S1 Projector User Manual


 
16
ENGLISH
BASIC OPERATIONS
Press the ON button on the remote controller or the / I button on the projector.
The ON indicator lights up.
Switch to the equipment connected to the projector.
Every time the INPUT button of the projector or the INPUT 3 button of the remote controller is pressed,
the input signal rotates in the order of COMPONENT 1
COMPONENT 2
S-VIDEO
VIDEO
RGB
HDMI 1
HDMI 2. When the INPUT 4 button of the remote controller is pressed, the input signal
rotates in the opposite order. An input signal can also be directly selected by pressing one of the COMP.1,
COMP.2, S-VIDEO, VIDEO, RGB, HDMI 1 and HDMI 2 buttons on the remote control.
INPUT
V-MUTE
ENTER
MENU
ASPECT INFO.
C1 C2 S G1
H1 H2 V G2
A1
A2 RGB G3
STD DYN
I
M
A
G4
THTR
COMP.1 COMP.2 S-VIDEO USER
HDMI 1 HDMI 2 VIDEO
AUX 1
BLANKING
AUX 2
IRIS LAMP
C.TEMP GAMMA
B1 OFFB3B2
Selecting the Input Signal Source
C1 C2 S G1
H1 H2 V G2
A1
A2 RGB G3
STD DYN G4
THTR
COMP.1 COMP.2 S-VIDEO USER
HDMI 1 HDMI 2 VIDEO
AUX 1 AUX 2
ON
STANDBY
IRIS LAMP
C.TEMP GAMMA
Turning on the Power
You can select 4 kinds of ASPECT mode using remote controller.
Pressing the ASPECT button on the remote control rotates the
aspect ratio in the order of FULL
NORMAL
ZOOM
V-
STRETCH
THROUGH, allowing you to select an aspect ratio.
An aspect ratio can also be directly selected by pressing one of
the FULL, NORMAL, ZOOM or THROUGH buttons on the remote
controller. A selection can also be made from the menu. (
P.23)
Selecting the Aspect Mode
INPUT
V-MUTE
ENTER
MENU
ASPECT
FULL
CINEMA
VCR MODE
BLACK LEVEL
PATTERN
BLACK
NOR ZOOM THRU
INFO.
I
M
A
BLANKING
B1 OFFB3B2