Filter
Top Products
21
ENGLISH
NO SIGNAL VALID SIGNAL
ANY INPUT
VIDEO or S-VIDEO COMPONENT
NTSC PAL/SECAM 480i/576i 480p/576p 480i/576i 480p/576p Other
1080i/720p/
1080p/540p
Display Keystone –
●●●●●●●●●
Scale – ●●●●●●●●●
Width – ●●●●●●●●●
Position H – ●●●●●●●●●
Position V – ●●●●●●●●●
Overscan – ●●●● – ●●– *7
Installation
●●●●●●●●●●
OSD/Blanking Menu Position ●●●●●●●●●●
Language ●●●●●●●●●●
Status Info. ●●●●●●●●●●
Power-OFF Confirm. ●●●●●●●●●●
Blanking Memory – ●●●●●●●●●
Blanking Top – *8 *8 *8 *8 *8 *8 *8 *8 *8
Blanking Bottom – *8 *8 *8 *8 *8 *8 *8 *8 *8
Blanking Left – *8 *8 *8 *8 *8 *8 *8 *8 *8
Blanking Right – *8 *8 *8 *8 *8 *8 *8 *8 *8
Configuration Auto Power Off
●●●●●●●●●●
Trigger 2 Full ●●●●●●●●●●
Trigger 2 Normal ●●●●●●●●●●
Trigger 2 Zoom ●●●●●●●●●●
Trigger 2 V-Strech ●●●●●●●●●●
Trigger 2 Through ●●●●●●●●●●
Remote Control ●●●●●●●●●●
Reset Lamp Life ●●●●●●●●●●
Reset All ●●●●●●●●●●
*1 Can be selected only when User is selected for the Picture Mode.
*2 On only when interlaced signals are input. (Off for progressive signals.)
*3 On only when 1080i signals are input.
*4 On only when Aspect is set to Zoom or V-Stretch.
*5 On when the RGB/HD Adjust mode is set to Memory.
*6 On when the RGB/HD Adjust mode is set to Memory. However, as an exception, it is off when Aspect is set to Through.
*7 On when 480i/p or 576i/p signals are input.
*8 On when Blanking Memory is selected for OSD/Blanking.
*9 Cannot be selected when the default is selected for Picture Mode.
*10 Off when PC signals (1024 x 768, etc.) are input.