Filter
Top Products
23
ENGLISH
– Gamma setting
To change the type of Gamma curve, set the Picture Mode (
☞
p.22) to User (1 – 9). Select “Gamma”
from the displayed menu followed by the desired gamma curve (A, B, C, D, E, Theater, Standard or
Dynamic).
– Color Temp. (Color Temperature)
1 : Red comes out strong. Color temperature is about 5250 K.
2 : Red is mildly strong. Color temperature is about 5800 K.
3 : Normal. Color temperature is about 6500 K.
4 : Blue is mildly strong. Color temperature is about 7500 K.
5 : Blue comes out strong. Color temperature is about 9300 K.
HB : High Bright : Display brightest image.
NOTES:
- To adjust picture quality, set the index to a mode other than the default. See “Picture Mode”.
(
☞
P.22)
- The Gamma cannot be set unless User (1 - 9) is set for the Picture Mode (
☞
P.22).
- Tint cannot be adjusted for component input, HDMI input or PAL signals. For details, see “Functions
by Signal.” (
☞
P.20-21)
- The settings made in Picture Adjust are saved in the currently selected Picture Mode index.
ABCDE
Theater Dynamic
Picture quality in each of the picture modes can be adjusted to your liking and those adjustments can be
saved in memory.
User 1
Gamma
Contrast
Brightness
Color
Tint
0
0
0
3
0
Lamp Mode
Color Temp.
Normal
A
Iris
F6.0
Aspect
Full
C
D
E
B
A
Picture Adjust
Fine Menu 1
Fine Menu 2
Input Signal
RGB/HD Adjust
Display
OSD/Blanking
Config.
Theater
Standard
Dynamic
Picture Adjust
Adjustments
A, B, C, D, E, Theater,
Standard, Dynamic
-50
Ô
0
Ô
50
(Weak) (Default) (Strong)
-50
Ô
0
Ô
50
(Dark) (Default) (Bright)
-50
Ô
0
Ô
50
(Light) (Default) (Deep)
R50
Ô
0
Ô
G50
(Purple) (Default) (Green)
12345HB
(Red) (Blue)
Normal, Economy
F6.0, F3.0
Sets the lens aperture.
F6.0: Use to prioritize contrast.
F3.0: Use to prioritize brightness.
Full, Normal, Zoom, V-Stretch,
Through
Item
Gamma
Contrast
Brightness
Color
Tint
Color Temp.
(Color Temperature)
Lamp Mode
Iris
Aspect